Don-Jo 1151-613 90 Offset Door Pull

Don Jo 1151-613 90 Degree Offset Door Pull offers a robust solution for accessible doorways in commercial settings. Crafted from durable bronze, this door pull features a sleek oil-rubbed bronze finish that seamlessly blends with various architectural styles while ensuring long-lasting performance. With a 10-inch center-to-center (CTC) mounting and a 3/4-inch diameter, it’s designed for comfort and ease of use. The 2-1/2-inch projection provides ample space for gripping, while the 1-3/4-inch clearance ensures a smooth operation without the need for tight grasping or twisting of the wrist, complying with accessibility standards. This door pull is particularly beneficial for environments where ease of access is paramount, as it supports lever-operated and push-type mechanisms. Measuring 10-3/4 inches overall, the Don Jo 1151-613 is perfect for high-traffic areas, enhancing both functionality and safety. Its commercial-grade installation ensures reliability in demanding environments. Backed by a one-year limited warranty and originating from Taiwan, this product exemplifies quality craftsmanship and thoughtful design. Elevate your door hardware with this stylish and practical offset door pull, ideal for both commercial and residential applications.

90 Degree Offset Door Pull

Offset Door Pull, 90 Deg., 10" CTC, 3/4" Diameter, 2-1/2" Projection, 1-3/4" Clearance, 10-3/4" Overall, Oil Rubbed Bronze Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet