Don-Jo 1151-613 BTB 90 Offset Door Pull

Don Jo 1151-613 BTB 90 Degree Offset Door Pull offers a sleek and functional solution for both commercial and residential applications. Designed with a 10-inch center-to-center (CTC) spacing, this door pull features a 3/4-inch diameter for a comfortable grip, ensuring ease of use without the need for tight grasping or pinching. Its 2-1/2-inch projection and 1-3/4-inch clearance make it an ideal choice for accessible doorways, meeting the requirements for hardware that is both user-friendly and compliant with accessibility standards. Crafted from high-quality bronze and finished in an elegant oil-rubbed bronze (613/US10B), this door pull not only enhances the aesthetic of your space but also provides durability for long-term use. The back-to-back design is perfect for double doors, allowing for seamless operation from both sides. With a limited one-year warranty, you can trust in the quality and reliability of this product. The Don Jo 1151-613 is easy to install and ships conveniently via UPS, making it a practical choice for builders and homeowners alike. Elevate your entryways with this stylish and functional door pull that combines form and function effortlessly.

90 Degree Offset Door Pull

Offset Door Pull, 90 Deg., 10" CTC, 3/4" Diameter, 2-1/2" Projection, 1-3/4" Clearance, 10-3/4" Overall, Back to Back Pair, Oil Rubbed Bronze Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet