Don-Jo 1158147-613 33CTC 90 Offset Push/Pull Hardware Set

Don Jo 1158147-613 33CTC 90 Degree Offset Push/Pull Set offers a robust solution for high-traffic commercial environments. This push/pull set comprises the 1158 and 147 components, featuring a 33" center-to-center (CTC) push bar with a 1" diameter and a 3-1/2" projection. With an overall length of 34", this set provides ample clearance of 2-1/2", ensuring accessibility for all users. Designed with functionality in mind, the 90-degree offset door pull includes a 12" CTC configuration, also with a 1" diameter and matching projection and clearance dimensions. The oil-rubbed bronze finish adds a touch of elegance while ensuring durability, making it an excellent choice for any commercial application. In compliance with accessibility standards, the handles and operating devices are shaped for easy one-handed operation, eliminating the need for tight grasping, pinching, or wrist twisting. This design consideration is vital for ensuring ease of use in various settings. With a limited one-year warranty, the Don Jo 1158147-613 push/pull set is a reliable and stylish addition to any door hardware collection, providing both security and convenience. Whether you're upgrading existing hardware or outfitting a new facility, this set is an ideal choice for professional-grade installations.

90 Degree Offset Push/Pull Set

Push/Pull Set Includes 1158 and 147, Push Bar, 33" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 34" Overall, Offset Door Pull, 90 Deg., 12" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 13" Overall, Oil Rubbed Bronze Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet