Don-Jo 1158147-628 33CTC 90 Offset Push/Pull Hardware Set

Don Jo 1158147-628 33CTC 90 Degree Offset Push/Pull Set combines functionality and style, making it an ideal choice for commercial applications. This set includes both the Don Jo 1158 push bar and the 147 offset door pull, designed for ease of use and accessibility. With a 33-inch center-to-center (CTC) measurement, the push bar features a 1-inch diameter and a 3-1/2-inch projection, ensuring a comfortable grip while allowing for smooth operation. The offset door pull measures 12 inches CTC and mirrors the push bar's design with a 1-inch diameter and a 3-1/2-inch projection for consistent aesthetics. Both components offer a clearance of 2-1/2 inches, creating accessibility compliant with regulations, while the overall lengths are 34 inches for the push bar and 13 inches for the pull. The satin aluminum clear anodized finish not only enhances durability but also adds a sleek, modern look to any door. Constructed from high-quality aluminum, the Don Jo push/pull set is built for commercial use and comes with a limited one-year warranty. This set is an essential feature for accessible doors, ensuring they are easy to operate without requiring tight grasping or twisting of the wrist, making it perfect for high-traffic environments.

90 Degree Offset Push/Pull Set

Push/Pull Set Includes 1158 and 147, Push Bar, 33" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 34" Overall, Offset Door Pull, 90 Deg., 12" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 13" Overall, Satin Aluminum Clear Anodized Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet