Don-Jo 1158147-630 39CTC 90 Offset Push/Pull Hardware Set

Don Jo 1158147-630 39CTC 90 Degree Offset Push/Pull Set is an essential addition to any commercial space, designed to offer both functionality and a sleek aesthetic. This set includes a push bar (model 1158) and an offset door pull (model 147), each crafted with a 1-inch diameter that ensures ease of use. The push bar features a 39-inch center-to-center (CTC) measurement, while the offset pull is set at 12-inch CTC, making it suitable for a variety of door configurations. Constructed from durable stainless steel, this push/pull set comes in a satin finish (630/US32D), which not only provides a modern look but also enhances durability against wear and tear. With a projection of 3-1/2 inches and a clearance of 2-1/2 inches, this hardware allows for smooth operation without requiring tight grasping or pinching, adhering to accessibility standards. Intended for commercial use, the set is easy to install and meets the requirements for accessible door hardware, ensuring that it can be operated with one hand. With a limited one-year warranty, the Don Jo 1158147-630 39CTC Push/Pull Set is a reliable choice for enhancing door access in any professional environment.

90 Degree Offset Push/Pull Set

Push/Pull Set Includes 1158 and 147, Push Bar, 39" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 40" Overall, Offset Door Pull, 90 Deg., 12" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 13" Overall, Satin Stainless Steel Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet