Don-Jo 147-613 33CTC 33 CTC Push Bar

Don Jo 147-613 33CTC 33 CTC Push Bar is designed to enhance accessibility and ease of use in commercial environments. With a generous 33-inch center-to-center (CTC) measurement, this push bar allows for effortless operation, making it ideal for high-traffic areas. The 1-inch diameter and a 3-1/2 inch projection ensure a comfortable grip, while the 2-1/2 inch clearance accommodates various door configurations. Finished in a rich oil-rubbed bronze, the push bar not only provides a stylish touch but also ensures durability in demanding settings. The design adheres to guidelines for accessible door hardware, featuring a shape that can be easily grasped with one hand, eliminating the need for tight grasping or twisting of the wrist. This thoughtful engineering promotes safety and convenience for all users. The Don Jo 147-613 is suitable for commercial installation and comes with a one-year limited warranty. It is part of the Door Pulls, Push and Pull Plates series, making it a reliable choice for both functionality and aesthetic appeal. Whether you're upgrading existing doors or outfitting new constructions, this push bar is an excellent choice for enhancing accessibility without compromising on style.

33 CTC Push Bar

Door Push Bar, 33" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 34" Overall, Oil Rubbed Bronze Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet