Don-Jo 147-628 33CTC 33 CTC Push Bar

Don Jo 147-628 33CTC Push Bar offers a reliable solution for accessible door functionality in commercial settings. With a 33-inch center-to-center (CTC) measurement and a robust 1-inch diameter, this push bar provides an ergonomic design that ensures ease of use. The 3-1/2-inch projection and 2-1/2-inch clearance allow for a seamless integration into various door styles, while the overall length of 34 inches enhances its presence on any entrance. Crafted from durable aluminum and finished in a satin aluminum clear anodized coating, the Don Jo push bar not only meets aesthetic expectations but also withstands the rigors of daily use. Its design aligns with accessibility standards, ensuring that handles and pulls are easy to grasp without requiring tight pinching or twisting of the wrist. This makes it suitable for a wide range of users, including those with mobility challenges. Ideal for commercial installations, this push bar is part of the Door Pulls and Push and Pull Plates series, ensuring a cohesive look across hardware. With a limited one-year warranty, you can trust in its quality and performance. Elevate your door accessibility with the Don Jo 147-628 Push Bar, where functionality meets style.

33 CTC Push Bar

Door Push Bar, 33" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 34" Overall, Satin Aluminum Clear Anodized Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet