Don-Jo 147-628 34CTC 34" CTC Push Bar Installation Guide

Don Jo 147-628 34CTC 34 CTC Push Bar is designed for both functionality and accessibility. This push bar features a 34-inch center-to-center (CTC) measurement and a robust 1-inch diameter, ensuring it is comfortable to use while meeting commercial standards. With a 3-1/2 inch projection and 2-1/2 inch clearance, it provides ample space for easy operation without compromising on safety. Constructed from durable aluminum with a satin aluminum clear anodized finish, the push bar not only enhances the aesthetic appeal of your door but also withstands daily wear and tear. This matte silver finish complements various architectural styles, making it suitable for diverse commercial environments. Designed with accessibility in mind, the push bar promotes ease of use, allowing individuals to operate the door with one hand without the need for tight grasping, pinching, or wrist twisting. Its installation height complies with regulations, ensuring that it is usable for all. Backed by a limited one-year warranty, the Don Jo 147-628 offers peace of mind alongside its superior performance. Whether upgrading existing hardware or outfitting new construction, this push bar is an excellent choice for professionals seeking quality and reliability in door hardware solutions.

34 CTC Push Bar

Door Push Bar, 34" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 35" Overall, Satin Aluminum Clear Anodized Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet