Don-Jo 147-628 40CTC 40 CTC Push Bar

Don Jo 147-628 40CTC 40 CTC Push Bar offers an exceptional solution for enhancing accessibility and safety in commercial door applications. With a robust 1" diameter and a 40" center-to-center (CTC) spacing, this push bar ensures ease of use while meeting ADA compliance requirements. Its thoughtful design facilitates operation with one hand, eliminating the need for tight grasping or wrist twisting, thereby providing a user-friendly experience for all. The push bar features a sleek satin aluminum clear anodized finish, contributing to both durability and aesthetic appeal. With a projection of 3-1/2" and a clearance of 2-1/2", it seamlessly integrates into various door styles without compromising functionality. This model is specifically designed for commercial settings, ensuring that hardware is mounted at an accessible height of no more than 48 inches above the finished floor. Constructed from high-quality aluminum, the Don Jo 147-628 is built to withstand the rigors of daily use in busy environments. It comes with a limited one-year warranty, assuring you of its reliability. Whether for new installations or upgrades, this push bar is a vital addition to any building's safety and accessibility features.

40 CTC Push Bar

Door Push Bar, 40" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 41" Overall, Satin Aluminum Clear Anodized Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet