Don-Jo 20147-613 39CTC Straight Push/Pull Hardware Set

Don Jo 20147-613 39CTC Straight Push/Pull Set offers an ideal solution for high-traffic commercial environments, combining functionality with an elegant design. This set includes a robust push bar measuring 39 inches center-to-center (CTC), with a 1-inch diameter and a 3-1/2-inch projection, ensuring ease of access and smooth operation. The accompanying door pull, featuring a 10-inch CTC and an overall length of 11 inches, provides a comfortable grip with a 2-inch clearance. Crafted from durable bronze with an oil-rubbed finish, this push/pull set not only withstands daily use but also complements various architectural styles. Its thoughtful design meets accessibility standards, allowing for one-handed operation without the need for tight grasping or pinching, making it ideal for all users. The set is designed for commercial installation and is backed by a limited one-year warranty, ensuring peace of mind. With a total projection of 3 inches, the components are designed to maximize usability while maintaining a sleek profile. As part of the Door Pulls and Push and Pull Plates series, the Don Jo 20147-613 is a dependable choice for any building professional looking to enhance door accessibility and functionality.

Straight Push/Pull Set

Push/Pull Set Includes 20 and 147, Push Bar, 39" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 40" Overall, Door Pull, 10" CTC, 1" Diameter, 11" Overall, 3" Projection, 2" Clearance, Oil Rubbed Bronze Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet