Falcon Lock 24MELK-3FT-US32D-CON Motorized Electric Latch Retraction Kit, 24VDC, 36in for 24 Series, Satin SS

Falcon Lock 24MELK-3FT-US32D-CON KIT is a motorized electric latch retraction (MEL) kit designed to enhance the security and accessibility of multifamily and commercial properties. This innovative solution provides energy-efficient electronic control of exit devices, enabling seamless access for authorized users while ensuring robust security. Tailored for Falcon's 24 and 25 Series exit devices, the MEL option offers a convenient alternative to mechanical dogging, allowing the push bar to retract electronically. It can be integrated with credential readers for temporary unlatching or configured for extended free entry, making it versatile for various applications. With a self-calibrating motor assembly and on-board diagnostics, installation and troubleshooting become straightforward tasks. This kit is also vandal-resistant, detecting and responding to tampering attempts. The 24MELK-3FT is powered by a 24VDC power supply and is compatible with standard Schlage power supplies, allowing for efficient power management across multiple components. Available in a sleek satin stainless steel finish (630/US32D), it fits seamlessly into modern architectural designs. Options for security monitoring and fail-safe/electric trim configurations enhance its functionality. Elevate your security with the Falcon Lock 24MELK-3FT-US32D-CON KIT, ensuring reliable safety and ease of access for any facility.

KIT - Motorized Electric Latch Retraction Kit with Allegion Connect, 24VDC 1A, 36in for 24 Series, 630/US32D Satin Stainless Steel

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction. The MEL option is available on panic and fire rated devices. Because fire exit hardware must be self latching, an automatic fire alarm system must be incorporated to drop power to fire rated MEL devices in case of fire.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise).
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board.
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices.
• On-board installation and troubleshooting diagnostics built into the motor assembly.
• Self-calibrating motor assembly.
• Push bar is pulled in electronically when dogged.
• Vandal resistant – detects and responds to events of attack and tampering.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating. The MEL device is compatible with the following equipment: PS900 Series power supplies PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL.

Options:

• Security monitoring (DM, LM, RX).
• Fail Safe/Fail Secure electric trim (FSA/FSE).

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 612/US10 - Bronze, Satin
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 630/US32D - Satinless Steel, Satin
• 628/US28 - Anodized Aluminum
• 710/313AN - Anodized Duranodic