Falcon Lock 25MELK-3FT-622-CON Allegion 24VDC Motorized Electric Latch Retraction Kit, 36in for 25 Series

Falcon Lock 25MELK-3FT-622-CON KIT is a state-of-the-art Motorized Electric Latch Retraction Kit designed for efficiency and convenience in multifamily and commercial settings. This kit operates at 24VDC with a 1A current, making it suitable for the Falcon 24 and 25 series exit devices, excluding the mortise model. The sleek flat black finish (622/US19) adds a touch of modernity to any entryway. The MEL option allows for energy-efficient electronic control of exit devices, momentarily unlatching doors for authorized users when connected to credential readers. It simplifies door access with its modular design, making installation straightforward for existing Falcon exit devices. The self-calibrating motor assembly ensures reliable performance, while on-board diagnostics aid in troubleshooting. Built to withstand tampering and vandalism, this robust kit is compatible with a variety of power supplies, including the PS900 Series. Furthermore, it can be integrated with security monitoring systems and offers fail-safe or fail-secure electric trim options. Ideal for those seeking enhanced security without sacrificing convenience, the Falcon Lock 25MELK-3FT-622-CON KIT is your go-to solution for reliable access control in high-traffic areas.

KIT - Motorized Electric Latch Retraction Kit with Allegion Connect, 24VDC 1A, 36in for 25 Series Except 25-M (Mortise), 622/US19 Flat Black Painted

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction. The MEL option is available on panic and fire rated devices. Because fire exit hardware must be self latching, an automatic fire alarm system must be incorporated to drop power to fire rated MEL devices in case of fire.

Features:

• MEL option available on 24 and 25 series exit devices, except 25-M (mortise).
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board.
• Modular design allows for a simplified installation of the available MEL conversion kit to existing mechanical Falcon 24 or 25 exit devices.
• On-board installation and troubleshooting diagnostics built into the motor assembly.
• Self-calibrating motor assembly.
• Push bar is pulled in electronically when dogged.
• Vandal resistant – detects and responds to events of attack and tampering.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 series option boards - 900-2RS, 900-4R and 900-4RL.
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately

Options:

• Security monitoring (DM, LM, RX).
• Fail safe/fail secure electric trim (FSA/FSE).

Models:

Model No.	Door Size	Minimum door opening width (add 3.5" to standard)
MEL-25-R	3'	2' 11", 2' 10-7⁄8", 2' 10-1⁄4", 2' 10-5⁄8"
MEL-25-R	4'	3' 5", 3' 4-7⁄8", 3' 4-1⁄4", 3' 4-5⁄8"
MEL-25-C	3'	2' 10-5⁄8"
MEL-25-C	4'	3' 4-5⁄8"
MEL-25-V	3'	2' 10-5⁄8"
MEL-25-V	4'	3' 4-5⁄8"

Finishes:

• 605/US3 - Bright brass
• 606/US4 - Satin brass
• 612/US10 - Satin bronze
• 625/US26 - Bright chromium
• 626/US26D - Satin chromium
• 630/US32D - Satin stainless steel
• 628/US28 - Anodized aluminum
• 710/313AN - Anodized duranodic