Falcon Lock 25MELK-4FT-695-CON Motorized Electric Latch Retraction Kit, 24VDC for 25 Series, Dark Bronze

Falcon Lock 25MELK-4FT-695-CON KIT is a state-of-the-art Motorized Electric Latch Retraction Kit designed to enhance security and accessibility in multifamily and commercial facilities. This innovative kit operates with 24VDC 1A power and is compatible with Falcon's 25 Series exit devices, excluding the 25-M mortise model. The energy-efficient electric latch retraction allows for convenient electronic control, making it ideal for use with credential readers to grant momentary access to authorized individuals. The modular design simplifies installation onto existing Falcon exit devices, while on-board diagnostics ensure quick troubleshooting. This kit boasts a self-calibrating motor assembly, enhancing its reliability. Additionally, it features vandal-resistant technology that detects and responds to tampering, reinforcing the security of your premises. Falcon Lock's MEL option is perfect for panic and fire-rated devices, integrating seamlessly with automatic operators. It enables extended periods of free entry, serving as a modern alternative to mechanical dogging. To ensure compliance with fire safety regulations, an automatic fire alarm system must be included for fire-rated installations. With options for security monitoring and fail-safe or fail-secure electric trim, the Falcon Lock 25MELK-4FT-695-CON KIT is a versatile solution that meets the demands of contemporary security needs.

KIT - Motorized Electric Latch Retraction Kit with Allegion Connect, 24VDC 1A, 48in for 25 Series, Except 25-M (Mortise), 695/SP313 Dark Bronze

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction. The MEL option is available on panic and fire rated devices. Because fire exit hardware must be self latching, an automatic fire alarm system must be incorporated to drop power to fire rated MEL devices in case of fire.

Features:

• MEL option available on 24 and 25 series exit devices, except 25-M (mortise).
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board.
• Modular design allows for a simplified installation of the available MEL conversion kit to existing mechanical Falcon 24 or 25 exit devices.
• On-board installation and troubleshooting diagnostics built into the motor assembly.
• Self-calibrating motor assembly.
• Push bar is pulled in electronically when dogged.
• Vandal resistant – detects and responds to events of attack and tampering.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 series option boards - 900-2RS, 900-4R and 900-4RL.
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately

Options:

• Security monitoring (DM, LM, RX).
• Fail safe/fail secure electric trim (FSA/FSE).

Models:

Model No.	Door Size	Minimum door opening width (add 3.5" to standard)
MEL-25-R	3'	2' 11", 2' 10-7⁄8", 2' 10-1⁄4", 2' 10-5⁄8"
MEL-25-R	4'	3' 5", 3' 4-7⁄8", 3' 4-1⁄4", 3' 4-5⁄8"
MEL-25-C	3'	2' 10-5⁄8"
MEL-25-C	4'	3' 4-5⁄8"
MEL-25-V	3'	2' 10-5⁄8"
MEL-25-V	4'	3' 4-5⁄8"

Finishes:

• 605/US3 - Bright brass
• 606/US4 - Satin brass
• 612/US10 - Satin bronze
• 625/US26 - Bright chromium
• 626/US26D - Satin chromium
• 630/US32D - Satin stainless steel
• 628/US28 - Anodized aluminum
• 710/313AN - Anodized duranodic