Falcon Lock MEL-25C-L-QUA-US26D-36X96-RHR Motorized Electric Latch Retraction Exit Device with Quantum Lever Trim 510L

Falcon Lock MEL-25C-L-QUA-US26D-36X96-RHR KIT is an advanced motorized electric latch retraction (MEL) device designed for seamless electronic control of exit mechanisms in multifamily and commercial settings. This concealed vertical rod exit device combines security and convenience, featuring a Quantum Lever Trim 510L and a sleek satin chrome finish (626/US26D). With its energy-efficient 24VDC motor, the MEL allows for flexible installation and can easily integrate with credential readers for controlled access. The modular design simplifies the upgrade from existing mechanical Falcon 24 or 25 exit devices, ensuring a hassle-free transition. Built-in diagnostics assist with installation and troubleshooting, while the self-calibrating motor guarantees reliable operation. The device supports fail-safe and fail-secure electric trim options, enhancing your security setup. It operates with a low inrush current of just 1.0 amps, making it compatible with standard Schlage power supplies. Additionally, the vandal-resistant construction responds to tampering, safeguarding your premises against unauthorized access. Measuring 36 inches by 96 inches, and designed for right-hand reverse applications, the MEL-25C offers a robust solution to meet your exit device needs. Trust Falcon Lock for dependable security solutions that blend functionality with advanced technology.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged