Falcon Lock MEL-25C-NL-US26D-48X96 Motorized Electric Latch Retraction CVR Exit Device, 24VDC, Satin Chrome

Falcon Lock MEL-25C-NL-US26D-48X96 KIT offers a sophisticated solution for controlling access with its motorized electric latch retraction (MEL) system. This concealed vertical rod exit device seamlessly integrates energy-efficient electronic control, ensuring reliable operation in multifamily and commercial settings. Constructed to meet Grade 1 standards, the device is designed for durability and performance, making it an ideal choice for high-traffic areas. With a satin chrome finish (626/US26D), the MEL-25C-NL enhances the aesthetic of any entryway while providing robust security features. The system supports mechanical egress, ensuring safety during emergencies. It can be used alongside credential readers, allowing for quick and secure entry for authorized users. The modular design simplifies installation, making it easy to retrofit onto existing Falcon 24 or 25 Series exit devices. This kit requires a 1-1/4 mortise cylinder and operates on a 24VDC power supply at 1 amp. It includes advanced features like self-calibrating motor assembly and on-board diagnostics for troubleshooting. Additionally, it is vandal-resistant, offering added security against tampering. For optimal functionality, a power transfer solution is required and sold separately. Experience the perfect blend of security, efficiency, and convenience with the Falcon Lock MEL-25C-NL-US26D-48X96 KIT.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Nightlatch Pull Trim 512NL, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged