Falcon Lock MEL-25R-L-BE-DAN-US26D-36-RHR Motorized Electric Latch Rim Exit Device, Dane Lever Trim 510L-BE, Satin Chrome

Falcon Lock MEL-25R-L-BE-DAN-US26D-36-RHR KIT features advanced motorized electric latch retraction (MEL) technology, offering a seamless and energy-efficient solution for both multifamily and commercial properties. This rim exit device is designed for right-hand reversible applications, allowing for easy installation and flexibility in various door setups. With a robust Grade 1 rating and a sleek satin chrome finish, it not only ensures high security but also complements modern architectural aesthetics. The MEL option enables electronic control of the latch, providing a convenient alternative to mechanical dogging. Authorized users can gain instant access when paired with credential readers, while the device also allows for extended periods of unlatching, facilitating free entry for high-traffic areas. The self-calibrating motor assembly ensures reliability, while the vandal-resistant design protects against tampering. This model operates at 24VDC with a low inrush current of just 1 amp, making it compatible with standard Schlage power supplies. The modular design streamlines installation of the MEL conversion kit to existing Falcon exit devices. For added functionality, integration with electric trim options and security monitoring systems is available, enhancing the overall security framework of your premises. The Falcon Lock MEL-25R-L-BE-DAN is a durable and efficient choice for securing entrances while maintaining ease of access.

KIT - Motorized Electric Latch Retraction, Rim Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 36in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged