Falcon Lock MEL-25R-L-BE-QUA-US26D-48-LHR Quantum 510L-BE Motorized Rim Exit Device, 24VDC, Satin Chrome, Grade 1

Falcon Lock MEL-25R-L-BE-QUA-US26D-48-LHR KIT offers a sophisticated solution for secure access control with its motorized electric latch retraction (MEL). Designed for multifamily and commercial applications, this rim exit device combines efficiency and convenience, ensuring mechanical egress while allowing electronic control of the latch. Compatible with credential readers, it enables authorized users to unlatch doors momentarily or allows for extended free entry-an excellent alternative to mechanical dogging. This Grade 1 device operates on a 24VDC, 1 Amp power supply, making it energy efficient and scalable for longer wire runs. Its modular design simplifies the installation process, especially when retrofitting existing Falcon 24 or 25 Series exit devices. The self-calibrating motor assembly includes built-in diagnostics for easy installation and troubleshooting. The MEL-25R features a vandal-resistant design, providing robust security against tampering and attacks. A necessary power transfer (EPT, electrified hinge, or door loop) ensures reliable wiring from the door to the frame. Available in a sleek satin chrome finish (626/US26D), this exit device not only enhances safety but also complements modern architectural aesthetics, making it a versatile choice for any building professional or knowledgeable homeowner.

KIT - Motorized Electric Latch Retraction, Rim Exit Device, Blank Escutcheon x Quantum Lever Trim 510L-BE, 48in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged