Falcon Lock MEL-25R-L-BE-QUA-US26D-48-RHR Quantum 510L-BE Motorized Rim Exit Device, 24VDC, Satin Chrome, Grade 1

Falcon Lock MEL-25R-L-BE-QUA-US26D-48-RHR KIT offers a sophisticated solution for secure access control in multifamily and commercial environments. This motorized electric latch retraction (MEL) system pairs seamlessly with the 24 and 25 Series exit devices, facilitating both reliable mechanical egress and energy-efficient electronic control. Designed for right-hand reverse/reversible installations, this device operates on a 24VDC power supply with a modest current draw of 1 amp, making it compatible with standard Schlage power supplies. The MEL system enhances convenience by allowing momentary unlatching through credential readers, while also providing the option for extended latch retraction for free entry, replacing the need for mechanical dogging. With its self-calibrating motor assembly, built-in troubleshooting diagnostics, and vandal-resistant features, the MEL-25R is engineered for durability and ease of installation. This Grade 1 exit device comes in a sleek satin chrome finish (626/US26D) and is suitable for various door sizes. Additionally, integrating a power transfer option (sold separately) ensures a clean wiring solution. The Falcon Lock MEL-25R-L-BE-QUA-US26D-48-RHR KIT is the ideal choice for enhancing security without sacrificing access efficiency.

KIT - Motorized Electric Latch Retraction, Rim Exit Device, Blank Escutcheon x Quantum Lever Trim 510L-BE, 48in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged