Falcon Lock MEL-25R-L-DT-DAN-US26D-36-LHR Motorized Electric Latch Retraction Rim Exit Device with Dane Lever Dummy Trim

Falcon Lock MEL-25R-L-DT-DAN-US26D-36-LHR KIT offers a robust solution for securing exit points in multifamily and commercial buildings. This motorized electric latch retraction (MEL) system enhances the functionality of the Falcon 25 Series exit devices, ensuring users enjoy seamless access control while maintaining mechanical egress at all times. Designed for efficiency, the MEL operates on a 24VDC power supply, drawing just 1 amp of current, making it an energy-conscious choice. Its modular design simplifies installation, allowing for easy conversion from existing mechanical setups. The self-calibrating motor assembly and on-board diagnostics streamline troubleshooting, ensuring reliability and ease of maintenance. With vandal-resistant features that alert to tampering, the MEL-25R enhances security without compromising convenience. It can be integrated with credential readers for authorized access or programmed for extended latch retraction, allowing free entry during specific hours. The product is compatible with various power supplies and requires a power transfer for installation, available separately. Finished in a durable satin chrome (626/US26D), this exit device not only provides superior functionality but also complements modern architectural aesthetics. Whether you’re managing a commercial property or upgrading security measures, the Falcon Lock MEL-25R is a smart choice for dependable access control.

KIT - Motorized Electric Latch Retraction, Rim Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 36in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged