Falcon Lock MEL-25R-L-DT-QUA-US26D-36-RHR Quantum Rim Exit Device with Motorized Latch, Satin Chrome, Right Hand, 24VDC

Falcon Lock MEL-25R-L-DT-QUA-US26D-36-RHR KIT offers a cutting-edge solution for secure and efficient access control with its motorized electric latch retraction (MEL). Designed for multifamily and commercial properties, this rim exit device integrates seamlessly with credential readers to provide momentary unlatching for authorized users. The 24VDC, 1 Amp motorized design is energy efficient, allowing for longer wire runs and compatibility with standard Schlage power supplies. This Grade 1 exit device features a reversible right-hand installation and is complemented by the Quantum Lever Dummy Trim 510L-DT. Its modular design facilitates simplified installation, even retrofitting existing mechanical Falcon 24 or 25 Series exit devices. Built-in diagnostics ensure easy troubleshooting, while the self-calibrating motor assembly enhances reliability. The MEL device's vandal-resistant features detect tampering attempts, ensuring security remains uncompromised. To enhance functionality, a power transfer solution is required, sold separately. Available in a sleek Satin Chrome finish (626/US26D), this exit device is not only functional but also aesthetically pleasing. For building professionals and discerning homeowners, the Falcon Lock MEL-25R-L-DT-QUA-US26D-36-RHR KIT is a top-tier choice for modern security solutions.

KIT - Motorized Electric Latch Retraction, Rim Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 36in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged