Falcon Lock MEL-25R-L-NL-QUA-US26D-36-RHR Motorized Electric Latch Retraction Rim Exit Device with Quantum Lever Trim 510L-NL

Falcon Lock MEL-25R-L-NL-QUA-US26D-36-RHR KIT offers advanced motorized electric latch retraction for enhanced security and convenience. This rim exit device features a Quantum lever nightlatch trim and is designed for right-hand reversible installation, making it an excellent choice for multifamily and commercial real estate applications. With a robust 24VDC, 1 Amp power requirement, the MEL-25R ensures energy efficiency while maintaining Grade 1 durability. The motorized electric latch retraction system allows for seamless electronic control of the exit device, facilitating easy access for authorized users via credential readers. Unlike traditional mechanical dogging, this device can remain unlatched for extended periods, allowing free entry while still ensuring mechanical egress for safety. Its vandal-resistant design detects and responds to tampering attempts, further enhancing security. Installation is simplified thanks to its modular design, compatible with existing Falcon 24 and 25 Series exit devices. The built-in installation and troubleshooting diagnostics streamline setup. Available in a sleek Satin Chrome finish (626/US26D), this exit device not only meets security needs but also complements modern architectural designs. For comprehensive security solutions, consider integrating with security monitoring and fail-safe features. The MEL-25R-L-NL-QUA is the ideal choice for those seeking reliability and advanced functionality in security hardware.

KIT - Motorized Electric Latch Retraction, Rim Exit Device, Escutcheon x Quantum Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 36in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged