Falcon Lock MEL-25R-L-QUA-US26D-48-RHR Motorized Electric Latch Retraction Rim Exit Device with Quantum Lever Trim 510L

Falcon Lock MEL-25R-L-QUA-US26D-48-RHR KIT is a sophisticated motorized electric latch retraction (MEL) system designed for reliable security in multifamily and commercial settings. This rim exit device combines advanced technology with user-friendly functionality, providing a cost-effective solution for electronic access control. Featuring a sleek Satin Chrome finish, the MEL-25R is rated Grade 1 for superior durability and performance. With a 24VDC, 1 Amp power requirement, this device supports longer wire runs, ensuring efficient installation with standard Schlage power supplies. The self-calibrating motor assembly simplifies troubleshooting and enhances reliability, while the vandal-resistant design actively detects tampering. This unit is compatible with various credential readers and can be integrated into access control systems, allowing authorized users to unlatch doors momentarily or keep them unlocked for extended periods. The MEL-25R also ensures mechanical egress at all times, offering peace of mind in emergency situations. Installation is a breeze thanks to its modular design, which allows for easy conversion from existing Falcon 24 and 25 Series exit devices. The MEL-25R-L-QUA also requires a 1-1/4 mortise cylinder for complete functionality and supports power transfer options for a seamless setup. Choose this exit device for enhanced security and convenience in your building management.

KIT - Motorized Electric Latch Retraction, Rim Exit Device, Escutcheon x Quantum Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 48in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged