Falcon Lock MEL-25V-L-BE-DAN-US26D-36X96-RHR Motorized Electric Latch Retraction SVR Vertical Rod Exit Device, Satin Chrome

Falcon Lock MEL-25V-L-BE-DAN-US26D-36X96-RHR KIT delivers advanced security with its motorized electric latch retraction (MEL) feature, designed for multifamily and commercial spaces. This Grade 1 exit device incorporates a surface vertical rod mechanism, providing reliable emergency egress while maintaining security. The MEL technology allows for energy-efficient electronic control, enabling authorized users to momentarily unlatch doors through credential readers. It can also be programmed for extended access, eliminating the need for mechanical dogging. The self-calibrating motor assembly ensures seamless operation and built-in diagnostics facilitate troubleshooting, streamlining maintenance. Constructed from durable materials with a sleek satin chrome finish (626/US26D), this exit device is not only functional but also aesthetically pleasing. Its vandal-resistant design detects tampering, offering an extra layer of security. Installation is straightforward thanks to a modular design, allowing easy conversion from existing mechanical Falcon 24 or 25 series exit devices. The MEL operates on a 24VDC power supply and requires a power transfer mechanism, such as an electrified hinge or door loop, for installation. With the Falcon Lock MEL-25V-L-BE-DAN, security and convenience come together, making it an ideal choice for modern access control systems.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged