Falcon Lock MEL-25V-L-BE-QUA-US26D-48X96-RHR Motorized Electric Latch Retraction SVR Exit Device w/ Quantum Lever Trim 510L-BE

Falcon Lock MEL-25V-L-BE-QUA-US26D-48X96-RHR KIT offers an advanced solution for secure and efficient access control in both multifamily and commercial settings. This motorized electric latch retraction (MEL) system is designed to enhance safety while providing convenience, allowing for an electronic control of exit devices without compromising mechanical egress. The SVR Surface Vertical Rod Exit Device features a sleek Quantum Lever Trim 510L-BE and is finished in a stylish satin chrome (626/US26D). With a door size compatibility of 48 inches by 96 inches and a right-hand reverse/reversible configuration, it adapts to various installation needs. The MEL operates on a 24VDC, 1 Amp power supply, ensuring energy efficiency and effective performance. Key benefits include a vandal-resistant design that detects tampering attempts, self-calibrating motor assembly for simplified installation, and onboard diagnostics for troubleshooting. The modular design allows easy integration with existing Falcon 24 or 25 Series exit devices, making it an ideal choice for upgrading security systems without extensive modifications. This kit requires a power transfer (EPT) for installation and is compatible with various power supplies, ensuring versatility. Enhance the security of your premises with the reliable Falcon Lock MEL-25V-L-BE-QUA-US26D-48X96-RHR KIT, a perfect blend of technology and functionality.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Blank Escutcheon x Quantum Lever Trim 510L-BE, 48in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged