Falcon Lock MEL-25V-L-QUA-US26D-48X96-LHR Motorized Electric Latch Retraction SVR Exit Device with Quantum Lever Trim

Falcon Lock MEL-25V-L-QUA-US26D-48X96-LHR KIT offers a sophisticated solution for access control with its motorized electric latch retraction (MEL) feature. Designed for multifamily and commercial properties, this exit device ensures energy-efficient electronic control, providing a seamless and secure entry point. With a robust Grade 1 rating and a sleek satin chrome finish, this device not only enhances security but also complements modern architectural aesthetics. The MEL option integrates easily with credential readers, allowing authorized users to unlatch doors momentarily or maintain extended access as needed. Its modular design simplifies installation, making it compatible with existing Falcon 24 or 25 Series exit devices. Built-in diagnostics within the motor assembly facilitate troubleshooting, while the self-calibrating motor ensures optimal performance over time. Safety is paramount, as the device is vandal-resistant, detecting and responding to tampering attempts. The MEL operates on a 24VDC power supply, requiring a maximum of 1 amp, ensuring minimal energy consumption. Additionally, a power transfer mechanism is necessary for installation, which can be purchased separately. With dimensions of 48 inches by 96 inches and a left-hand reversible design, the Falcon Lock MEL-25V-L-QUA-US26D is an ideal choice for secure, efficient access control in any professional setting.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged