Falcon Lock MEL-F25C-L-NL-DAN-US26D-36X96-LHR Motorized Electric Latch Retraction Exit Device with Dane Lever Trim 510L-NL

Falcon Lock MEL-F25C-L-NL-DAN-US26D-36X96-LHR KIT offers a cutting-edge solution for secure access with its Motorized Electric Latch Retraction (MEL) feature. This fire-rated CVR concealed vertical rod exit device is designed specifically for multifamily and commercial applications, providing reliable and energy-efficient electronic control. The device is UL listed and operates on a 24VDC power supply, drawing only 1 Amp, making it compatible with standard Schlage power supplies. This exit device features a modular design that simplifies installation of the MEL conversion kit onto existing Falcon 24 or 25 Series exit devices, excluding mortise models. The self-calibrating motor assembly enhances usability by ensuring consistent performance, while the vandal-resistant design offers robust protection against tampering and attacks. With mechanical egress always available, the MEL system can be integrated with credential readers for controlled access, further elevating security protocols. The satin chrome finish (626/US26D) not only provides an attractive aesthetic but also ensures durability. This exit device is tailored for 36" x 96" doors with a left-hand reverse (LHR) configuration, making it a versatile choice for a variety of settings. Elevate your building's security with the Falcon Lock MEL-F25C exit device, designed for efficiency and peace of mind.

KIT - Motorized Electric Latch Retraction, Fire Rated CVR Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, LHR, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged