Falcon Lock MEL-F25R-L-BE-DAN-US26D-36-RHR Motorized Latch Retraction Fire Rated Rim Exit Device, Dane Lever Trim 510L-BE, 36in, RHR, Satin Chrome

Falcon Lock MEL-F25R-L-BE-DAN-US26D-36-RHR KIT is a high-performance motorized electric latch retraction (MEL) exit device designed for fire-rated applications. With its concealed vertical rod design, this exit device provides both security and convenience for multifamily and commercial buildings, ensuring mechanical egress at all times. This system operates on a reliable 24VDC power supply, drawing only 1 amp, making it energy-efficient for extended use. The modular design simplifies installation by allowing a seamless upgrade from existing Falcon 24 or 25 Series devices. Built-in diagnostics and a self-calibrating motor assembly enhance reliability, while its vandal-resistant features ensure durability against tampering. The MEL option can be integrated with credential readers for momentary unlatching, providing secure access for authorized users. Additionally, it supports the use of automatic operators, offering flexibility for various door applications. The device is UL listed, ensuring compliance with safety standards. This kit includes a blank escutcheon and Dane Lever Trim 510L-BE, suitable for doors measuring 36 inches by 96 inches, and is configured for right-hand reverse/reversible use. Available in a sleek satin chrome finish (626/US26D), the Falcon Lock MEL-F25R-L-BE-DAN is a robust solution for modern security needs.

KIT - Motorized Electric Latch Retraction, Fire Rated CVR Concealed Vertical Rod Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 36in x 96in, RHR Right Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged