Falcon Lock MEL-F25R-L-BE-DAN-US26D-48-LHR Motorized Latch Retraction Fire Rated Rim Exit Device, Dane Lever Trim 510L-BE, 48in, LHR, Satin Chrome

Falcon Lock MEL-F25R-L-BE-DAN-US26D-48-LHR KIT features a motorized electric latch retraction (MEL) system, designed to enhance security while ensuring efficient and convenient access. This fire-rated concealed vertical rod exit device is perfect for multifamily and commercial properties, delivering both reliability and affordability in electromechanical latch retraction. With a UL rating and a 24VDC, 1 Amp power requirement, this Grade 1 device operates seamlessly with credential readers, allowing for momentary unlatching for authorized personnel or extended access for unimpeded entry. The energy-efficient motorized design supports longer wire runs and is compatible with standard Schlage power supplies, simplifying installation through its modular design. The MEL-F25R-L also includes built-in diagnostics for easy troubleshooting and a self-calibrating motor assembly, ensuring optimal performance. Its vandal-resistant features add an extra layer of security, responding to tampering and attacks. Additionally, a power transfer device is required for installation, ensuring a smooth wiring path from door to frame. Available in a sleek 626/US26D satin chrome finish, this exit device combines functionality with aesthetic appeal, making it a perfect choice for any professional setting. Enhance your building’s security with Falcon Lock’s innovative exit solutions.

KIT - Motorized Electric Latch Retraction, Fire Rated CVR Concealed Vertical Rod Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 48in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged