Falcon Lock MEL-F25R-L-NL-QUA-US26D-48-RHR Motorized Electric Latch Exit Device, Fire Rated, Quantum Lever Trim 510L-NL

Falcon Lock MEL-F25R-L-NL-QUA-US26D-48-RHR KIT offers a sophisticated solution for secure access in multifamily and commercial settings. This motorized electric latch retraction (MEL) device enhances the functionality of exit doors, combining energy efficiency with reliable security features. Designed for use with Falcon's 24 and 25 Series exit devices, the MEL option ensures mechanical egress while allowing for convenient electronic control. With a fire-rated rim exit device and an elegant Quantum lever nightlatch trim, this model is UL listed and operates on a 24VDC, 1 Amp power supply. The self-calibrating motor assembly simplifies installation and troubleshooting, making it an excellent choice for building professionals. The push bar is pulled in electronically when dogged, providing seamless operation. Vandal-resistant features ensure the device can withstand tampering attempts, enhancing security in high-traffic areas. It requires a 1-1/4 mortise cylinder and can be integrated with credential readers for momentary unlatching. The modular design allows for easy upgrades to existing mechanical devices, making the MEL-F25R a versatile and practical choice for modern security needs. Available in a sleek satin chrome finish (626/US26D), this exit device not only meets stringent safety standards but also complements a variety of architectural styles.

KIT - Motorized Electric Latch Retraction, Fire Rated Rim Exit Device, Escutcheon x Quantum Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 48in, RHR Right Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged