Falcon Lock MEL-F25R-TP-US26D-48 Motorized Electric Latch Retraction Rim Exit Device, 24VDC, Grade 1, Satin Chrome

Falcon Lock MEL-F25R-TP-US26D-48 KIT offers an advanced solution for security and convenience with its motorized electric latch retraction feature. Designed for both multifamily and commercial properties, this fire-rated rim exit device seamlessly integrates electronic control into your exit systems, providing an efficient and cost-effective approach to door management. The MEL option, compatible with Falcon's 24 and 25 Series exit devices, ensures mechanical egress at all times while allowing for credential readers to momentarily unlatch doors for authorized individuals. The device operates on a 24VDC power supply, drawing a low inrush current of just 1 amp, making it suitable for standard Schlage power supplies. Its modular design simplifies installation, particularly when converting existing mechanical exit devices. Built with vandal resistance in mind, the MEL device is equipped with on-board diagnostics for easy troubleshooting and a self-calibrating motor assembly. Additionally, the push bar can be electronically dogged, enhancing security without compromising ease of use. This exit device is available in a sleek satin chrome finish and requires a mortise cylinder for complete functionality. Elevate your security with the reliable and efficient Falcon Lock MEL-F25R-TP-US26D-48 KIT, designed to meet the demands of modern building professionals and homeowners alike.

KIT - Motorized Electric Latch Retraction, Fire Rated Rim Exit Device, Thumbpiece Pull Trim 512TP, (Requires 1-1/4 Mortise Cylinder), 48in, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged