Falcon Lock MEL-F25V-L-BE-DAN-US26D-48X96-LHR Motorized Electric Latch Retraction Fire Rated SVR Exit Device with Dane Trim

Falcon Lock MEL-F25V-L-BE-DAN-US26D-48X96-LHR KIT offers a sophisticated solution for secure access with its Motorized Electric Latch Retraction (MEL) feature. This fire-rated SVR Surface Vertical Rod Exit Device is designed for high-traffic commercial and multifamily environments, ensuring both safety and convenience. With a satin chrome finish (626/US26D), this exit device seamlessly blends functionality with modern aesthetics. The MEL feature provides energy-efficient electronic control, allowing for momentary unlatching with credential readers or extended free entry, making it a versatile alternative to mechanical dogging. The self-calibrating motor assembly and built-in diagnostics enhance ease of installation and troubleshooting, while the vandal-resistant design ensures durability against tampering. This device operates on 24VDC with a low inrush current of only 1 Amp, making it compatible with standard Schlage power supplies. It also requires a power transfer (EPT, electrified hinge, or door loop) for installation, sold separately. With its modular design, the MEL Conversion kit simplifies retrofitting existing Falcon 24 or 25 exit devices. Achieve optimal security and accessibility with the Falcon Lock MEL-F25V-L-BE-DAN-US26D-48X96-LHR KIT, a Grade 1 exit device that meets stringent UL standards.

KIT - Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 48in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged