Falcon Lock MEL-F25V-L-DT-QUA-US26D-48X96-LHR Motorized Electric Latch Retraction Fire Rated SVR Exit Device with Quantum Trim

Falcon Lock MEL-F25V-L-DT-QUA-US26D-48X96-LHR KIT offers a sophisticated solution for efficient access control with its motorized electric latch retraction (MEL) technology. This fire-rated surface vertical rod exit device combines functionality and security, making it ideal for multifamily and commercial properties. Designed for ease of installation, the MEL option is compatible with most Falcon 24 and 25 Series exit devices (excluding mortise models). Featuring a self-calibrating motor assembly and built-in diagnostics, this device simplifies maintenance and troubleshooting. The energy-efficient design allows for longer wire runs and works seamlessly with standard Schlage power supplies. Vandal resistance is enhanced through detection mechanisms that respond to tampering, ensuring durability. The MEL-F25V also provides mechanical egress at all times, with capabilities to integrate with credential readers for secure access. Its elegant satin chrome finish (626/US26D) complements various architectural styles, while the left-hand reverse/reversible configuration ensures versatility in installation. For optimal performance, a power transfer (EPT, electrified hinge, or door loop) is required and sold separately. With a low inrush current of 1.0 amps, the MEL device is designed to accommodate multiple components without exceeding power supply ratings, making it a reliable choice for any security application.

KIT - Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 48in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged