Falcon Lock MEL-F25V-L-NL-QUA-US26D-48X96-RHR Motorized Electric Latch Retraction Exit Device with Quantum Lever Trim 510L-NL

Falcon Lock MEL-F25V-L-NL-QUA-US26D-48X96-RHR KIT is a motorized electric latch retraction (MEL) exit device designed for both multifamily and commercial real estate applications. Its energy-efficient electronic control allows for seamless operation while enhancing security and convenience. This fire-rated surface vertical rod exit device features a stylish Quantum lever nightlatch trim, ensuring a professional finish. This model operates on 24VDC with a low inrush current of 1.0 amps, making it compatible with standard Schlage power supplies. The modular design simplifies installation, allowing for easy upgrades to existing Falcon 24 or 25 Series exit devices. With mechanical egress always available, users can enjoy peace of mind knowing the device is ready in emergencies. Incorporating vandal resistance, the MEL device actively detects and responds to tampering, ensuring robust security. It also supports credential readers for controlled access and can operate alongside automatic door operators. The satin chrome finish (626/US26D) complements a variety of architectural styles while offering durability. For those seeking a reliable, efficient, and stylish exit solution, the Falcon Lock MEL-F25V-L-NL-QUA-US26D-48X96-RHR KIT stands out as an excellent choice in enhancing building safety.

KIT - Motorized Electric Latch Retraction, Fire Rated Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, RHR, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged