Falcon Lock RX-F25C-L-DT-DAN-US26D-48X96-LHR RX Fire Rated CVR Concealed Vertical Rod Exit Device with Dane Lever Dummy Trim

Falcon Lock RX-F25C-L-DT-DAN-US26D-48X96-LHR KIT is a robust solution that seamlessly combines fire safety with an elegant design. This fire-rated CVR concealed vertical rod exit device provides a reliable escape route while enhancing the aesthetic appeal of your entryways. It features a patented center slide mechanism for easy in-field adjustments and two-point latching for optimal door security. Constructed from extruded aluminum, this exit device is designed to withstand impacts and ensure longevity. The design cleverly eliminates exposed screws and rivets, resulting in a streamlined look that fits well in various architectural styles. With a flush-end cap design, it is built to resist damage in high-traffic environments. The RX-F25C is UL listed with a three-hour fire rating and meets ANSI A156.3 grade 1 standards, making it suitable for both single and double door applications. It supports various electric functionalities, allowing for integration with building security systems. With a left-hand reverse handing and a satin chrome finish, this exit device not only prioritizes safety but also adds a touch of modern elegance. Ideal for storefronts and commercial spaces, the Falcon Lock RX-F25C-L-DT-DAN is an essential addition to any security setup.

KIT - RX Request to Exit, Fire Rated CVR Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 48in x 96in, Less Dogging, LHR Left Hand Reverse/Reversible Handing, UL, Grade 1, 626/US26D Satin Chrome

The F-25-C Series device lets you combine the safety of a fire-rated device with the clean aesthetics that come with a concealed vertical rod installation. In-field adjustment is simple thanks to our patented center slide mechanism. Two-point latching ensures optimal security at the door.

Features:

• Extruded aluminum construction delivers greater strength and impact resistance.
• Includes panic exit and fire exit hardware for single and double door applications.
• No exposed screws or rivets on the back of the device for a streamlined design and clean lines for a more attractive installation.
• One trim input design provides maximum versatility and ability to use various trims.
• Stainless steel push pad cover provides a scratch-resistant pushing surface.
• Flush-end caps help prevent them from being destroyed or knocked off in abusive situations.
• Narrow stile center case is ideal for storefront applications with narrow stile aluminum doors.

Specifications:

• Hand: Field reversible.
• UL: "A" label (3 hr.); 4’ 0" x 10’ 0" single doors; 8’ 0" x 10’ 0" pair of doors (F-25-M x F-25-V or F-25-C).
• Strikes: 4188 mortised top, 2130 bottom standard.
• Latchbolt: Stainless steel, 3⁄4" throw.
• Deadlocking latchbolt: Standard.
• Stock sizes: See Chart Below.
• Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
• Projection: 2-3⁄4" maximum.
• Stile: 4" minimum.
• Mounting height: 40-1⁄4" from CL to finished floor.
• Electric functions: Can be interfaced with building security systems. Motorized electric latch retraction (fail secure only), FSA/FSE trim, security monitoring, delayed egress and exit alarm available.
• Fasteners: All mounting screws are concealed. All machine screws (AMS) standard.
• Sex bolts: Required when used with wood, composite or non-reinforced hollow metal doors. For EO device specify 6 - 425 (# 10-24) SNB. For devices with trim, specify 2 - 425 (# 10-24) SNB.
• ANSI: Certified ANSI A156.3-2001 grade 1 standards.
• 25-C-LBR: Less bottom rod, auxiliary fire pin required per pair.
• Vertical rods: Furnished to length based on 40-1⁄4" horizontal CL to finished floor and a 7’ 0" door. Variations from these standards must be specified when ordering.

Stock Sizes:

Finishes:

• US3/605 - Brass, Bright
• US4/606 - Brass, Satin
• US10/612 - Bronze, Satin
• US11/643e - Bronze, Aged
• US15/619 - Nickel, Satin
• US19/622 - Black, Matte
• US26/625- Chromium, Bright
• US26D/626 - Chromium, Satin
• US28/628 - Anodized, Aluminum
• US32/629 - Stainless Steel, Bright
• US32D/630 - Stainless Steel, Satin
• 313AN/710 - Anodized Duranodic