Falcon Lock RX-MEL-25C-L-BE-DAN-US26D-36X96-RHR RX Request to Exit Motorized Latch, Concealed Vertical Rod, Satin Chrome

Falcon Lock RX-MEL-25C-L-BE-DAN-US26D-36X96-RHR KIT features a state-of-the-art motorized electric latch retraction (MEL) system, designed for efficient electronic control of exit devices in multifamily and commercial facilities. This concealed vertical rod exit device is equipped with a blank escutcheon and the stylish Dane Lever Trim 510L-BE, making it both functional and visually appealing. Operating on a 24VDC power supply with a 1 Amp current, this Grade 1 exit device ensures reliability and strength. The self-calibrating motor assembly provides seamless operation, while the onboard diagnostics simplify installation and troubleshooting. The MEL feature allows for momentary unlatching with credential readers, enhancing convenience for authorized users. It also enables extended periods of latch retraction for free entry, serving as an effective alternative to mechanical dogging. Designed with security in mind, this device is vandal-resistant and automatically responds to tampering events. The modular design allows for easy upgrades to existing Falcon 24 or 25 Series devices, ensuring compatibility and ease of installation. Available in a sleek satin chrome finish (626/US26D), this exit device not only meets safety standards but also complements contemporary architectural designs, making it an ideal choice for professionals seeking reliable security solutions.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Concealed Vertical Rod Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged