Falcon Lock RX-MEL-25C-L-DAN-US26D-36X96-LHR RX Request to Exit Motorized Latch, CVR Vertical Rod, Dane Lever Trim, Satin Chrome

Falcon Lock RX-MEL-25C-L-DAN-US26D-36X96-LHR KIT offers an advanced solution for secure and efficient access control in multifamily and commercial settings. Featuring a motorized electric latch retraction (MEL), this exit device seamlessly integrates electronic control for enhanced security without compromising on ease of use. The concealed vertical rod design, paired with the elegant Dane lever trim, ensures both aesthetics and functionality. Designed for doors measuring 36 inches by 96 inches, the left-hand reverse (LHR) orientation makes it versatile for various installations. The device operates on a 24VDC power supply, drawing just 1 amp, which supports longer wire runs and compatibility with standard Schlage power supplies. Its modular design simplifies installation, making it a practical choice for upgrading existing mechanical exit devices. This Grade 1 rated device guarantees mechanical egress and features vandal-resistant capabilities, detecting tampering attempts to bolster security. The self-calibrating motor assembly aids in installation and troubleshooting, while the push bar can be electronically retracted when dogged, providing convenience and quick access when needed. With finishes available in satin chrome (626/US26D), the Falcon Lock RX-MEL-25C-L-DAN is not only reliable but also visually appealing, making it an ideal choice for modern security needs.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged