Falcon Lock RX-MEL-25C-L-NL-QUA-US26D-48X96-LHR RX MEL Motorized Exit Device with Quantum Lever Nightlatch Trim, Satin Chrome

Falcon Lock RX-MEL-25C-L-NL-QUA-US26D-48X96-LHR KIT offers a sophisticated solution for secure and efficient exit access in multifamily and commercial settings. This motorized electric latch retraction (MEL) system seamlessly integrates with Falcon's 24 and 25 Series exit devices, delivering energy efficiency and superior functionality. Designed with a concealed vertical rod exit device, the unit allows for mechanical egress while supporting electronic control for authorized users. Measuring 48 inches by 96 inches, this left-hand reverse/reversible device operates on a 24VDC power supply with a low inrush current of just 1 amp, making it compatible with standard Schlage power supplies. The push bar is electronically pulled in when dogged, ensuring a streamlined exit process. Its vandal-resistant design detects and responds to tampering, enhancing security. Installation is simplified through a modular design that allows for easy upgrades from existing mechanical units. Built-in diagnostics within the motor assembly aid troubleshooting, while self-calibrating technology ensures optimal performance. The satin chrome finish (626/US26D) adds a modern touch, making it an elegant addition to any facility. Elevate your security with the Falcon Lock RX-MEL-25C-L-NL-QUA exit device, where safety meets cutting-edge technology.

KIT - RX MEL Request to Exit, Motorized Electric Latch Retraction, Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged