Falcon Lock RX-MEL-25C-L-NL-QUA-US26D-48X96-RHR RX MEL Motorized Exit Device with Quantum Lever Nightlatch Trim 510L-NL

Falcon Lock RX-MEL-25C-L-NL-QUA-US26D-48X96-RHR KIT offers a sophisticated solution for securing your commercial or multifamily property. This motorized electric latch retraction (MEL) exit device combines convenience and energy efficiency, making it an ideal choice for high-traffic areas. Designed for use with Falcon's 24 and 25 Series exit devices, this concealed vertical rod exit device features a sleek escutcheon paired with the Quantum Lever Nightlatch Trim 510L-NL. The RX-MEL-25C-L-NL is compatible with a standard 1-1/4" mortise cylinder and operates on a 24VDC power supply, drawing just 1 amp, which allows for longer wire runs and compatibility with Schlage power supplies. This Grade 1 device ensures mechanical egress at all times, while the self-calibrating motor assembly and built-in diagnostics simplify installation and troubleshooting. Vandal-resistant features enhance security, detecting and responding to tampering attempts. The push bar electronically retracts when dogged, providing flexibility for access control systems. With a satin chrome finish, this exit device not only performs exceptionally but also complements modern architectural aesthetics. For reliable security that adapts to your needs, the Falcon Lock RX-MEL-25C-L-NL-QUA is the ideal choice.

KIT - RX MEL Request to Exit, Motorized Electric Latch Retraction, Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged