Falcon Lock RX-MEL-25C-L-QUA-US26D-36X96-RHR KIT - RX Motorized Exit Device, CVR Vertical Rod, Quantum Lever Trim, Satin Chrome

Falcon Lock RX-MEL-25C-L-QUA-US26D-36X96-RHR KIT combines advanced technology with user-friendly design to enhance access control in multifamily and commercial properties. This motorized electric latch retraction (MEL) system allows for efficient electronic control of exit devices while ensuring mechanical egress. The RX-MEL features a concealed vertical rod exit device coupled with the sleek Quantum lever trim, creating an aesthetically pleasing yet functional solution. Designed for doors measuring 36 inches by 96 inches, it accommodates right-hand reversible configurations with ease. This Grade 1 exit device operates on a 24VDC system with a low inrush current of just 1.0 amp, making it compatible with standard Schlage power supplies. Its modular design simplifies installation, allowing for retrofits on existing mechanical Falcon 24 or 25 Series exit devices. The self-calibrating motor assembly provides consistent performance, while built-in diagnostics make troubleshooting straightforward. Additionally, the system boasts vandal resistance, detecting tampering attempts for added security. With options for fail-safe or fail-secure electric trim, the RX-MEL is versatile enough to meet various security needs. Upgrade your building's access control with Falcon Lock's innovative exit device and experience peace of mind in safety and accessibility.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged