Falcon Lock RX-MEL-25C-TP-US26D-48X96 RX Request to Exit Motorized Latch, CVR Vertical Rod Device, Satin Chrome

Falcon Lock RX-MEL-25C-TP-US26D-48X96 KIT provides an advanced solution for secure and efficient access control in multifamily and commercial properties. This motorized electric latch retraction (MEL) system is designed to enhance the functionality of exit devices, delivering mechanical egress while allowing for energy-efficient electronic control. The concealed vertical rod exit device features a thumbpiece pull trim and requires a 1-1/4 mortise cylinder, making it an ideal choice for high-traffic areas. With a satin chrome finish (626/US26D), it seamlessly integrates into any modern aesthetic. Operating on 24VDC at 1 Amp, this Grade 1 device ensures reliable performance while offering the flexibility to connect with credential readers for keyless entry. Installation is straightforward due to its modular design, allowing for easy upgrades to existing Falcon 24 or 25 Series devices. The on-board diagnostics simplify troubleshooting, while the self-calibrating motor assembly enhances durability against tampering and vandalism. For added convenience, the MEL can be paired with standard Schlage power supplies and a power transfer device. This kit is perfect for building professionals and knowledgeable homeowners seeking a dependable and efficient exit solution.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Thumbpiece Pull Trim 512NL, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged