Falcon Lock RX-MEL-25R-L-DAN-US26D-48-RHR KIT - RX Motorized Electric Latch Rim Exit Device, Satin Chrome, 24VDC

Falcon Lock RX-MEL-25R-L-DAN-US26D-48-RHR KIT delivers a robust security solution with its motorized electric latch retraction (MEL) technology. Designed for multifamily and commercial properties, this rim exit device combines efficiency and reliability. The kit features a stylish Dane lever trim 510L and requires a 1-1/4 mortise cylinder for seamless integration. Operating at 24VDC with a low inrush current of just 1 amp, the RX-MEL offers energy-efficient performance while supporting longer wire runs. Its Grade 1 rating ensures durability, making it ideal for high-traffic areas. The self-calibrating motor assembly simplifies installation and troubleshooting, providing peace of mind for building professionals and homeowners alike. The MEL technology enhances security by allowing credential readers to unlatch doors momentarily, or it can be programmed for extended access. With vandal-resistant features, the device detects and responds to tampering attempts, ensuring enhanced safety. This system is compatible with Schlage power supplies and requires a power transfer option, sold separately. Available in a sleek satin chrome finish (626/US26D), the Falcon Lock RX-MEL-25R-L-DAN is an excellent choice for anyone seeking a reliable, modern exit solution that prioritizes both security and convenience.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Rim Exit Device, Escutcheon x Dane Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 48in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged