Falcon Lock RX-MEL-25R-L-DT-DAN-US26D-36-RHR RX Request to Exit Motorized Latch Rim Device, 36in RHR, Satin Chrome

Falcon Lock RX-MEL-25R-L-DT-DAN-US26D-36-RHR KIT offers a sophisticated solution for secure access control in multifamily and commercial environments. This motorized electric latch retraction (MEL) exit device features a rim exit design paired with a Dane lever dummy trim, designed for right-hand reversible installation on 36-inch doors. Operating on 24VDC with a low inrush current of 1 Amp, the device is both energy efficient and cost-effective, ideal for installations requiring extended wire runs. The RX-MEL kit provides mechanical egress while allowing for electronic control, enabling doors to unlatch momentarily or remain open for extended periods when integrated with credential readers. Its modular design simplifies installation, making it a seamless upgrade for existing Falcon 24 or 25 Series exit devices. Built-in diagnostics and a self-calibrating motor assembly streamline troubleshooting, while vandal-resistant features enhance security against tampering. Finished in satin chrome (US26D), this Grade 1 device meets stringent quality standards, ensuring durability and reliability. The RX-MEL-25R is compatible with various Schlage power supplies and can be paired with optional security monitoring and fail-safe or fail-secure trims, providing versatile options for any security setup. Enhance your access control with the dependable Falcon Lock RX-MEL-25R-L-DT-DAN.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Rim Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 36in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged