Falcon Lock RX-MEL-25R-L-NL-DAN-US26D-48-LHR KIT - RX Motorized Exit Device, Rim Latch, 48in, LHR, 24VDC, Grade 1, Satin Chrome

Falcon Lock RX-MEL-25R-L-NL-DAN-US26D-48-LHR KIT offers an efficient and secure solution for multifamily and commercial properties with its advanced Motorized Electric Latch Retraction (MEL) feature. Designed for use with Falcon’s 24 and 25 Series exit devices, this rim exit device ensures reliable mechanical egress while providing energy-efficient electronic control. With a sleek satin chrome finish (626/US26D), the RX-MEL-25R incorporates a Dane lever nightlatch trim and is suitable for left-hand reverse (LHR) installations. The unit operates on a 24VDC power supply, requiring only 1 amp of current, making it compatible with standard Schlage power supplies. Its modular design simplifies installation, allowing for easy upgrades from existing mechanical devices. The self-calibrating motor assembly enhances performance, while onboard diagnostics facilitate troubleshooting. In addition, the vandal-resistant features detect tampering and respond accordingly, ensuring heightened security. The RX-MEL-25R is designed to interface seamlessly with credential readers and can be configured for extended entry periods, offering a modern alternative to mechanical dogging. Whether you’re enhancing access control in a busy commercial facility or securing your residential property, the Falcon Lock RX-MEL-25R-L-NL-DAN-US26D-48-LHR KIT is the ideal choice for reliable, efficient security.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Rim Exit Device, Escutcheon x Dane Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 48in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged