Falcon Lock RX-MEL-25R-TP-US26D-48 KIT - RX Motorized Electric Latch Exit Device, 48in, 24VDC, Satin Chrome

Falcon Lock RX-MEL-25R-TP-US26D-48 KIT features a motorized electric latch retraction (MEL) system designed for reliable access control in multifamily and commercial environments. This rim exit device combines efficiency and convenience, allowing for electronic control of exit mechanisms without sacrificing mechanical egress. The thumbpiece pull trim adds an extra layer of accessibility, making it ideal for high-traffic areas. With a robust Grade 1 rating, this device operates on a 24VDC power supply and requires a 1.25-inch mortise cylinder for installation. Its energy-efficient design supports longer wire runs and is compatible with standard Schlage power supplies. The modular construction simplifies retrofitting existing Falcon 24 or 25 Series exit devices, while self-calibrating motor technology ensures seamless operation. The RX-MEL-25R is equipped with vandal-resistant features that detect tampering attempts, providing additional security. It includes on-board diagnostics for troubleshooting, ensuring minimal downtime. Designed for both efficiency and durability, this satin chrome finish device complements any modern aesthetic while enhancing security. The Falcon Lock RX-MEL-25R-TP-US26D-48 KIT is an essential upgrade for any facility requiring a reliable, efficient exit solution.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Rim Exit Device, Thumbpiece Pull Trim 512TP, (Requires 1-1/4 Mortise Cylinder), 48in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged