Falcon Lock RX-MEL-25V-L-DAN-US26D-48X96-RHR KIT - RX Motorized Electric Latch Exit Device, SVR, Satin Chrome, Grade 1

Falcon Lock RX-MEL-25V-L-DAN-US26D-48X96-RHR KIT offers an advanced solution for secure and efficient access control in multifamily and commercial settings. This motorized electric latch retraction (MEL) system integrates seamlessly with Falcon’s 24 and 25 Series exit devices, providing a reliable mechanism for electronic control of doors. With a grade 1 rating, this unit is built to withstand the rigors of daily use while ensuring safety and convenience. This exit device features a sleek satin chrome finish (626/US26D) and is designed to accommodate right-hand reverse/reversible door configurations. The self-calibrating motor assembly not only simplifies installation but also enhances operational reliability through built-in diagnostics. The MEL option allows for momentary unlatching via credential readers or extended latch retraction for uninterrupted access, making it an excellent alternative to mechanical dogging. Incorporating vandal-resistant technology, the RX-MEL ensures robust protection against tampering. It requires a standard 24VDC power supply and can be paired with optional equipment like security monitoring and fail-safe electric trim. Ideal for high-traffic areas, the Falcon Lock RX-MEL-25V-L-DAN enhances both security and user experience, making it a smart choice for your next project.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged