Falcon Lock RX-MEL-25V-L-DT-QUA-US26D-36X96-LHR Motorized Exit Device with Quantum Lever Dummy Trim, Satin Chrome, Grade 1

Falcon Lock RX-MEL-25V-L-DT-QUA-US26D-36X96-LHR KIT is designed for efficient and reliable access control in multifamily and commercial settings. This request-to-exit device features motorized electric latch retraction (MEL), which allows for energy-efficient electronic control, making it an ideal choice for establishments requiring both security and convenience. The SVR Surface Vertical Rod Exit Device ensures smooth operation while the Quantum Lever Dummy Trim adds an elegant touch. This device operates on 24VDC with a 1 Amp current, conforming to Grade 1 standards for durability and reliability. Its modular design simplifies installation, as the MEL Conversion kit can be easily added to existing Falcon 24 or 25 Series exit devices. Built-in installation diagnostics facilitate quick troubleshooting, while the self-calibrating motor assembly ensures optimal performance. Designed with security in mind, the RX-MEL device is vandal-resistant and responds to tampering attempts. It can be integrated with credential readers for authorized access, allowing doors to unlatch temporarily or remain unlocked for extended periods, providing a seamless entry experience. With its satin chrome finish (US26D), this exit device not only meets functional requirements but also enhances the aesthetic of any environment. Choose the Falcon Lock RX-MEL for robust security solutions without compromising style.

KIT - Request to Exit, Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 36in x 84in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged