Hafele 372.27.322 Hafele Free Space 6.15 Swing-Up Fitting

Hafele 372.27.322 Swing-Up Fitting, Hafele Free Space 6.15 offers a robust solution for heavy-duty applications, designed specifically for standard lid stay mechanisms. Finished in anthracite with nickel-plated lever arms, this fitting efficiently supports one-piece lids weighing up to 25.7 kg and suitable for cabinet heights ranging from 350 mm to 650 mm. The swing-up fitting incorporates spring-loaded lever arms, ensuring smooth operation while minimizing the risk of injury or damage. Precise installation is crucial; it requires a Pozi Drive #2 bit for screw tightening, with attention to adjusting both sides to the same tension. The opening angle can be customized to either 90° or 107°, providing flexibility in usability. With a recommended efficiency factor of 6,300 to 9,000, this fitting is ideal for cabinets up to 1,800 mm wide. It is essential to consider the total weight of the door, including the handle, when selecting the appropriate model. Each unit comes with everything needed for installation, including two fittings, front fixing brackets with pre-mounted screws, and a mounting template. Choose the Hafele Free Space 6.15 for a seamless blend of functionality and style in your next cabinetry project.

Swing-Up Fitting, Hafele Free Space 6.15

Heavy Duty, for standard applications with handle, Model H, anthracite

Important Selecting the correct model depends on door height and then door weight which should also consider the weight of the handle. We recommend ordering the stronger fitting if in doubt. The lever arms are spring loaded. There is a risk of injury and damage to the fitting! After mounting the arms, do not press them down in the open position until the counterweight of the door is mounted. A Pozi Drive #2 bit is required for all screw installations and adjustment features, otherwise damage to the screw head is likely. Be certain that Euro screws which attach the fittings to the side panels are completely tight, drawing the fitting tight against the side wall. For tension adjustment feature, we recommend using a cordless driver as these screws are geared very low. Be sure to adjust both sides to the same tensioning position.

• Planning Front panel thickness Y mm 16 18 19 22 24 26 28 Distance X mm (with cabinet top panel thickness K=16 mm) 117 110 107 96 90 83 76
• Sample measurements table for selecting the right model based on cabinet height and flap weight including handle Model G, EF≈4080-6600 Model H, EF≈6300-9000 Cabinet height mm Flap weight kg Flap weight kg 350 11.7–18.9 18.0–25.7 375 10.9–17.6 16.8–24.0 400 10.2–16.5 15.8–22.5 425 9.6–15.5 14.8–21.2 450 9.1–14.7 14.0–20.0 475 8.6–13.9 13.3–18.9 500 8.2–13.2 12.6–18.0 525 7.8–12.6 12.0–17.1 550 7.4–12.0 11.5–16.4 575 7.1–11.5 11.0–15.7 600 6.8–11.0 10.5–15.0 625 6.5–10.6 10.1–14.4 650 6.3–10.2 9.7–13.8

Resources

• CAD data
• Door Weight Calculation Chart
• Door Weight Ranges Chart_6.15
• Free Space 5.15 Push Sell Sheet EN
• Free Space 6.15 Mounting Instructions
• Installation instructions
• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 9.103A
• Technical data sheet
• Technical data sheet
• Technical data sheet