Hafele 372.27.350 Hafele Free Space Swing-Up Fitting 1.11

Hafele 372.27.350 Swing-Up Fitting, Hafele Free Space 1.11 offers unmatched versatility, accommodating up to 80% of flap applications with its robust design. Crafted for standard applications, this fitting is perfect for one-piece wood or aluminum frame doors, featuring a sleek anthracite housing and nickel-plated support lever for a modern touch. The adjustable door opening angles of 90° or 107° with an integrated stop enhance usability, while the compact design optimizes cabinet space. Installation is a breeze with plugs for standard 32/37 mm line holes and a single pre-mounted screw, allowing for quick setup. The intuitive 3D door alignment and closing adjustment ensure precise fitting for various cabinet heights up to 650 mm and lid weights of up to 4.3 kg. This fitting requires no additional hinges or cover caps, simplifying your project. For optimal performance, a Pozi Drive #2 bit is necessary for all adjustments and installations. It comes complete with two fittings (right/left), two mounting brackets with screws, and a set of mounting instructions. Whether for residential or commercial use, the Hafele 372.27.350 Swing-Up Fitting is engineered for efficiency and durability, making it an essential addition to any cabinetry project.

Swing-Up Fitting, Hafele Free Space 1.11

for standard applications with handle, Model B, anthracite

Important Selecting the correct model depends on door height and then door weight which should also consider the weight of the handle. We recommend ordering the stronger fitting if in doubt. The lever arms are spring loaded. There is a risk of injury and damage to the fitting! After mounting the arms, do not press them down in the open position until the counterweight of the door is mounted. A Pozi Drive #2 bit is required for all screw installations and adjustment features, otherwise damage to the screw head is likely. Be certain that Euro screws which attach the fittings to the side panels are completely tight, drawing the fitting tight against the side wall. For tension adjustment feature, we recommend using a cordless driver as these screws are geared very low. Be sure to adjust both sides to the same tensioning position.

• Sample measurements table for selecting the right model based on cabinet height and flap weight including handle Model B, EF≈480-983 Model C, EF≈856-1615 Model D, EF≈1460-2276 Model E, EF≈2086-3323 Model F, EF≈3040-4305 Cabinet height mm Flap weight kg Flap weight kg Flap weight kg Flap weight kg Flap weight kg 225 2.3–4.3 3.8–7.1 6.4–9.3 9.2–13.4 13.4–19.1 250 1.9–3.9 3.4–6.4 5.8–9.1 8.3–12.6 12.1–17.2 275 1.9–3.5 3.1–5.8 5.3–8.2 7.5–12.0 11.0–15.6 300 1.7–3.2 2.8–5.3 4.8–7.5 6.9–11.0 10.1–14.3 325 1.6–3.0 2.6–4.9 4.4–7.0 6.4–10.2 9.3–13.2 350 1.5–2.8 2.4–4.6 4.1–6.5 5.9–9.5 8.6–12.3 375 1.3–2.6 2.2–4.3 3.8–6.0 5.5–8.8 8.1–11.4 400 1.2–2.4 2.1–4.0 3.6–5.6 5.2–8.3 7.6–10.7 425 1.1–2.3 2.0–3.8 3.4–5.3 4.9–7.8 7.1–10.1 450 1.0–2.1 1.9–3.5 3.2–5.0 4.6–7.3 6.7–9.5 475 1.0–2.0 1.8–3.4 3.0–4.7 4.3–7.0 6.4–9.0 500 0.9–1.9 1.7–3.2 2.9–4.5 4.1–6.6 6.0–8.6 525 0.9–1.8 1.6–3.0 2.7–4.3 3.9–6.3 5.7–8.2 550 0.8–1.7 1.5–2.9 2.6–4.1 3.7–6.0 5.5–7.8 575 0.8–1.7 1.4–2.8 2.5–3.9 3.6–5.7 5.2–7.4 600 0.8–1.6 1.4–2.7 2.4–3.7 3.4–5.5 5.0–7.1 625 0.7–1.5 1.3–2.5 2.3–3.6 3.3–5.3 4.8–6.8 650 0.7–1.5 1.3–2.4 2.2–3.5 3.2–5.1 4.6–6.6
• Planning Front panel thickness Y mm 16 18 19 22 24 26 28 Distance X mm (with cabinet top panel thickness K=16 mm) 117 110 107 96 90 83 76

Resources

• CAD data
• Certificate
• Door Weight Calculation Chart
• Door Weight Ranges Chart_1.11
• Free space 1.11 installation instructions
• Installation instructions
• Installation instructions
• LGA - quality certificate for Free space 1.11
• Mounting Instructions
• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 9.102
• Technical data sheet
• Technical data sheet