Hafele 372.27.356 Hafele Free Space 1.8 Swing-Up Fitting

Hafele 372.27.356 Swing-Up Fitting, Hafele Free Space 1.8 offers a remarkable solution for push-to-open applications without handles. Engineered for efficiency, this model features an anthracite finish and is compatible with a wide range of flap applications-up to 80%-making it a versatile choice for modern cabinetry. This compact fitting allows for a clean and contemporary design while maximizing interior space within cabinets. The door opening angle can be adjusted to either 90° or 107°, providing flexibility based on your specific needs. Installation is straightforward; it plugs into standard 32/37 mm line holes and is secured with a pre-mounted screw, ensuring a quick setup. Designed for wood or aluminum frame doors, additional hinges or cover caps are unnecessary, simplifying your project. With the ability to accommodate cabinet heights from 225 mm to 650 mm and flap weights up to 7.1 kg, this fitting is suitable for various applications. Each package includes two fittings (right and left), mounting brackets with screws, a free push catch, and comprehensive installation instructions. Please note that proper tension adjustments are essential for optimal performance, and a Pozi Drive #2 bit is required for installation. Embrace innovation and efficiency with Hafele's Swing-Up Fitting.

Swing-Up Fitting, Hafele Free Space 1.8

For push to open applications without handles, Model C pto, Anthracite

Important Selecting the correct model depends on door height and then door weight which should also consider the weight of the handle. We recommend ordering the stronger fitting if in doubt. The lever arms are spring loaded. There is a risk of injury and damage to the fitting! After mounting the arms, do not press them down in the open position until the counterweight of the door is mounted. A Pozi Drive #2 bit is required for all screw installations and adjustment features, otherwise damage to the screw head is likely. Be certain that Euro screws which attach the fittings to the side panels are completely tight, drawing the fitting tight against the side wall. For tension adjustment feature, we recommend using a cordless driver as these screws are geared very low. Be sure to adjust both sides to the same tensioning position.

• Planning Front panel thickness Y mm 16 18 19 22 24 26 28 Distance X mm (with cabinet top panel thickness K=16 mm) 117 110 107 96 90 83 76
• Sample measurements table for selecting the right model based on cabinet height and flap weight Model B pto, EF≈480-983 Model C pto, EF≈856-1615 Model D pto, EF≈1460-2276 Model E pto, EF≈2086-3323 Cabinet height mm Flap weight kg Flap weight kg Flap weight kg Flap weight kg 225 2.3–4.3 3.8–7.1 6.4–9.3 9.2–13.4 250 1.9–3.9 3.4–6.4 5.8–9.1 8.3–12.6 275 1.9–3.5 3.1–5.8 5.3–8.2 7.5–12.0 300 1.7–3.2 2.8–5.3 4.8–7.5 6.9–11.0 325 1.6–3.0 2.6–4.9 4.4–7.0 6.4–10.2 350 1.5–2.8 2.4–4.6 4.1–6.5 5.9–9.5 375 1.3–2.6 2.2–4.3 3.8–6.0 5.5–8.8 400 1.2–2.4 2.1–4.0 3.6–5.6 5.2–8.3 425 1.1–2.3 2.0–3.8 3.4–5.3 4.9–7.8 450 1.0–2.1 1.9–3.5 3.2–5.0 4.6–7.3 475 1.0–2.0 1.8–3.4 3.0–4.7 4.3–7.0 500 0.9–1.9 1.7–3.2 2.9–4.5 4.1–6.6 525 0.9–1.8 1.6–3.0 2.7–4.3 3.9–6.3 550 0.8–1.7 1.5–2.9 2.6–4.1 3.7–6.0 575 0.8–1.7 1.4–2.8 2.5–3.9 3.6–5.7 600 0.8–1.6 1.4–2.7 2.4–3.7 3.4–5.5 625 0.7–1.5 1.3–2.5 2.3–3.6 3.3–5.3 650 0.7–1.5 1.3–2.4 2.2–3.5 3.2–5.1

Resources

• CAD data
• Certificate
• Door Weight Calculation Chart
• Door Weight Ranges Chart_1.8
• Free space 1.8 push installation instructions
• Installation instructions
• LGA quality certificate for Häfele Free space 1.8 push
• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 9.103
• Technical data sheet
• Technical data sheet