Hafele 521.99.580 Parallel Shelf Pins for Parallel Rod Wine Storage offer a reliable solution for securing your wine storage system. Designed with a practical spring-loading mechanism, these pins enable quick and easy installation into standard 5 mm shelf pin holes, ensuring a snug fit for parallel rods between your casework sidewalls. Each pack contains 18 gray pins, crafted from durable ABS plastic, providing a robust support structure with a load-bearing capacity of 4.00 kg per parallel rod. The installation process is straightforward: simply fit the spring over the spline of the shelf pin, insert it into the ends of the parallel rods, and utilize the compression feature to align and secure the rods in place effortlessly. For optimal performance, it is recommended that the parallel rod be cut 22 mm (7/8") shorter than the interior dimensions of the casework sidewalls. Given that two parallel shelf pins are required for each rod, this product is perfect for enhancing the organization and accessibility of your wine collection. With Hafele’s attention to detail and quality, these parallel shelf pins are an essential addition to any wine storage setup, combining functionality with ease of installation.
Parallel Shelf Pins for Parallel Rod Wine Storage
18 Pins, Gray
Each parallel shelf pin (PSP) has a spring that slips over the spline. Insert the spline into the Parallel Rod on each end. The shelf pin compresses into the Parallel Rod allowing the rod to fit snugly between the interior casework sidewalls. To install a Parallel Rod into interior casework, fit the spring onto the spline of the PSP and insert it into the ends of the Parallel Rods. Insert one end of the rod into a 5 mm shelf hole, then push the rod against the side wall to compress the spring. At the same time, compress the other PSP by hand while you align the opposite shelf pin hole, releasing the pressure as the hardware pin springs expand against the casework sidewalls. The Parallel Rod is now securely held into place.
Color: Gray
Color/finish: Gray
Installation: The parallel rod should be cut 22 mm (7/8") shorter than the interior dimensions of the casework sidewall
Load bearing capacity: 4.00 kg
Material: ABS Plastic
Note: Each parallel shelf pin (PSP) has a spring that slips over the spline. Insert the spline into the Parallel Rod on each end. The shelf pin compresses into the Parallel Rod allowing the rod to fit snugly between the interior casework sidewalls. To install a Parallel Rod into interior casework, fit the spring onto the spline of the PSP and insert it into the ends of the Parallel Rods. Insert one end of the rod into a 5 mm shelf hole, then push the rod against the side wall to compress the spring. At the same time, compress the other PSP by hand while you align the opposite shelf pin hole, releasing the pressure as the hardware pin springs expand against the casework sidewalls. The Parallel Rod is now securely held into place.
Note on load bearing capacity: per parallel rod
Order reference: Two parallel shelf pins are required for each parallel rod
